JBlast

Grade.
Grain size 1.4-2.5mm.
Synthetic mineral abrasive available in both iron silicate or aluminium silicate forms.

Application.
Provides a coarse etch or anchor. Ideal for cleaning off heavily corroded steel, marine growth, heavy coatings, cement build-up and prior ro metal spray.

Grade.
Grain size 0.2-1.5mm.
Synthetic mineral abrasive available in both iron silicate or aluminium silicate forms.

Application.
Gives high cleaning rate and etch acceptable for most industrial coatings e.g. ship's hulls, tank internals, pipe joints and general steel fabrications.

Grade.
Grain size 0.2-0.7mm.
Synthetic mineral abrasive available in both iron silicate or aluminium silicate forms.

Application.
Provides a fine finish with a low profile for modern low build paints, selective coating removal, high performance wet blasting, motor body repairs etc.

Grade.
Grain size 0.15 -0.2mm.
Synthetic mineral abrasive available in Iron Silicate form.

Application.
For cleaning surfaces where an etch or anchor pattern is not required. Ideal for decarbonising, fan blade cleaning, furniture restoration etc.