Urea amino plastic blast media manufactured from prime cured mouldings. Available in commercial and Military specifications, such as Rolls Royce CSS227 and MIL-P-85891A. Available in white and mixed colour.

This media was designed for removal of paint and coatings from aluminium and composite materials without damaging these substrates. There is a vast array of other applications that can use this material and in the hands of a skilled operator large time and cost savings can be achieved against chemical and other forms of stripping. This is our commercially manufactured product made to the same standards as military product but without full first article inspection reports.

The material allows the controlled removal of surface coatings, paint , dirt, flash and burr from a variety of substrates, without damaging or peening the substrate, and at the correct pressures and conditions can achieve as much as a 6-12x recycle usage of the plastic media. This is due to the random ‘blocky/angular’ shape of the particle, and its thermoset qualities which will not shatter on impact and will rather ware down.

PROPERTIES

Abrasive Type

Plastic

Density

1.5 g/cm³

Bulk Density

0.7 g/cm³

Hardness

3.3 Mohs

Friability

Medium

Recyclability

High

Dust Levels

Very Low

Shape

Angular, Semi-Cubical

GRADES

T2 12/16 12/16
T2 12/20 12/20
T2 16/20 16/20
T2 20/30 20/30
T2 20/40 20/40
T2 30/40 30/40
T2 40/60 40/60
T2 60/80 60/80

APPLICATIONS

Acid Dipping / Caustic Dipping
Aerospace Composites
Aerospace Non-Destructive Testing
Alloy Wheel Repair and Refurbishment
Automotive
Composites/Carbon/Fibre Glass
Depainting
Electronic and Semi Conductor Industry
Glass & Ceramics: Paint & print removal without damage
Graffiti Removal
Inks and Dyes
Marine
Metals: Aerospace approval
Metals: Cleaning without dimensional change
Metals: Mould die and tool cleaning
Military
Plastics & Composites: Cosmetic matt or texture finish
Plastics & Composites: Deflashing thermoset mouldings
Plastics & Composites: Preparation for paint or metal sprayings
Plastics & Composites: Removal of paint and coating
Powder Coating and Stove Enamelling
Surface Finishing
Surface Preparation
Tyres & Rubber
Wood: Decontamination
Wood: Paint & coating removal without damage
Wood: Rejuvination
Wood: Surface preparation

Share this post