Vacuum Recovery Unit


The Vacuum Recovery Unit IND200Pis an economic and compact unit.

It consists of a small hopper sunk into the blast room floor, abrasive silo and vacuum producing unit.

The system allows for up to three hours continuous production before recovery of media is required.

Expended media is manually swept into the hopper and retrieved by vacuum into the silo and blast machine. The media will vary depending upon the users choice of abrasive.

During this process the recycled abrasive is cleaned and fines, dust and oversize contamination are separated from the reusable media.

This low cost system is the ideal way to convert from an expendable blast media to a full recyclable system.

To get a quote or order contact a member of the Hodge Clemco sales team.


See our blast room brochure for more information on all our full range.

Visit our YouTube channel to see our product videos.


For more info on our product range view our product catalogue.


At Hodge Clemco we also supply a large selection of abrasive media. You can find out more info on our abrasives in our brochure. Or visit the abrasive section of our website.

Abrasive Recovery Systems IND200P
IND200P Vacuum Recovery



Sweep-in with abrasive recovery by vacuum system (IND200P) (animation)