Control Lines

Deadman Lines

Colour coded 1/4″ (6mm) air lines are essential components for safe blasting systems and provide easier identification of lines carrying air for dead man operation, abrasive control and breathing air etc.

Air lines
HOSE7C1/4″ x 34ft(10m)Blue
HOSE7CR1/4″ x 34ft(10m)Red
HOSE7CY1/4″ x 34ft(10m)Yellow
HOSE7D1/4″ x 68ft(20m)Blue
HOSEDR1/4″ x 68ft(20m)Red
HOSE7DY1/4″ x 68ft(20m)Yellow



This valve is an air saving version of the RM21A. The air circuit is normally closed and is only activated when the handle is depressed.

RM200  Deadman Handle

Image 1
Image 2
Image 3







Owner’s Manual (233A)


“The blasters favourite”, widely used throughout the industry. This safety trigger is recognised as the best for site blasting conditions. (Supplied as RCAMV6 for remote control abrasive valve).

RM21 Deadman Handle

Image 1
Image 2
Image 3

Owner’s Manual (237)


The RCAMV6 Deadman Handle is specifically for use with pneumatic abrasive metering valves. The RM88 Slide valve kit enables the operator to switch abrasive on and off at the nozzle for blow-down or wash-down purposes.

RCAMV6 Deadman Handle