The media has been specially developed to provide a low dust environment for surface preparation.<\/p>\n
What is EnviraSponge?<\/strong><\/h3>\nEnviraSponge<\/figcaption><\/figure>\n
EnviraSponge is an abrasive encapsulated within sponge. It offers superior results and will achieve a safe, sustainable surface preparation whilst also being environmentally responsible. EnviraSponge’s dust containment and its ability to perform dry make it well suited in a production environment. Increased productivity and reduced downtime can be achieved because it allows confined spaces to be cleaned with out affecting sensitive equipment.<\/p>\n
EnviraSponge can be propelled via our range of Media Generators (blast machine). On impact with the surface the sponge flattens and exposes the abrasive which abrades or cleans whilst at the same time the sponge captures any dirt\/contamination\/dust on the surface. On rebound the sponge expands back to its original size causing a vacuum inside the sponge which captures the airborne dust particles. It is a recyclable media and minimises waste generated during surface cleaning. Unlike conventional hard abrasives which ricochet with significant retained energy, it transfers its energy upon contact by flattening out, thus vastly reducing the danger to the operator from ricochet.<\/p>\n
<\/p>\n
The main benefits are:<\/strong><\/h3>\n
\n
Low Dust – Containments are contained at the source, resulting in up to 98% less dust than conventional blasting.<\/li>\n
Superior surface preparation, achieving up to SA3\/SSPC-SA5 quality finish\/cleanliness.<\/li>\n
Ability to work safely in confined environments.<\/li>\n
Keep your sensitive assets protected.<\/li>\n
Recyclable – reduces waste by up to 94% versus conventional blasting.<\/li>\n
Improved operator visibility, meaning less re-work. greater operator safety – low energy abrasive rebound; low dust.<\/li>\n
Reduce down-time – with a near dust-free environment other trades can work simultaneously improving productivity over the different stages of a project.<\/li>\n
Dry surface preparation – no water used to achieve dust suppression, decreasing chances of flash rusting compared to wet systems.<\/li>\n
Replace mechanical cleaning tools for faster and easier treatment of curved surfaces with a near-perfect finish.<\/li>\n
Enhanced surface cleaning and chloride removal from steel. Removes up to 60% more chlorides than conventional blasting and can eliminate the need for any additional rinse clean.<\/li>\n
Can create a surface profile of between 5-100 microns on steel.<\/li>\n<\/ul>\n
<\/p>\n
For technical information on the EnviraSponge click here<\/a>.<\/p>\n
![\"EnviraSponge](\"https:\/\/www.hodgeclemco.co.uk\/wp-content\/themes\/Hodge%20Clemco\/images\/photos\/EnviraSponge_24Sep2011_0025-scaled.jpg\")